Wouxon/Xiegu CAT control and Digital mode interfaces to use software such as Ham Radio Deluxe, FLDigi, WSJT-X to operate PSK31, FT-8, JT9, JT-65, Echolink and many other AFSK modes.

 

We offer a range of interfaces to ensure maximum compatibility with modern and older PCs and digimode software. You can also choose to use your PCs internal sound card to generate/decode your Digimode signals or to use an external sound card interface to free up your PCs sound card for normal use. We use icons shown below to guide you to the best choice for your equipment setup.

  Suitable for any AFSK and Digital mode such as FT8, JT9, PSK31, WSPR ect. Perfect for use with WSJT-X, FlDigi, Ham Radio Deluxe (DM780), Echolink and many others. Please note that some of these applications offer enhanced functionality when you also have CAT control of the radio.
  The interface has a built in external USB Sound Card based on C-Media CM108 chip. This frees up your PCs internal sound card for normal windows functions. The interface has a built in PTT function and can be used without a CAT interface.
  The interface gives you CAT control of your transceiver via a built in USB Comm port. CAT control allows you to set/get the frequency and mode of your transceiver. The interface used the highly reliable FTDI UART comm port chipset.
  The interface gives you CAT control of your transceiver using "older" PCs legacy RS232 comm port. Also suitable if you use a USB to RS232 adapter. CAT control allows you to set/get the frequency and mode of your transceiver.

Digimode-1-Xiegu $66.00

   
 


USB CAT Control and Audio Interfacing of your Xiegu X5105 and G90 Transceiver allowing you to fully utilise software such as Ham Radio Deluxe, Echolink, PSK31, DM780, N1MM Logger, MixW and many more.

Complete plug-and-play solution. The interface is full wired for your PC and transceiver. Just follow the instructions to download the FTDI drviers, configure up your CAT/Digimode software and you are up and running.

The Tx/Rx audio signals are galvanically isolated by Bourns 600:600 Ohm transformers and the hardware PTT is opto-isolated. The USB section of the interface uses the highly reliable FTDI Chipset and provides a virtual comm port allowing full CAT control and hardare PTT keying over the RTS signal if required.

With this interface, you will be up and running on PSK31, Echolink, SSTV, Pactor, Packet or any mode that requires CAT control and Tx/Rx Audio Interfacing between your PC Soundcard and Radio within minutes.

Cable length is 1.8m from the USB and audio connectors to the interface box. The cables from the interface box to the transceiver is 0.6m. The box is very compact at 80x40x20mm making it ideal to hide away behind the PC or transceiver using no desk space.

The Xiegu X5105 emulates the Icom IC-7000 CAT controls and so set up your X5105 in your chosen CAT software with the Icom IC-7000 default settings.

Use the Drop-Down menu below to select your radio type.

Option 1

Xiegu X5105 and G90

 
Radio type
 



Digimode-2-Xiegu $50.00

   
 

 

Digital mode interface giving you fully Isolated Audio Interfacing of your Xiegu-Wouxon X108G allowing you to fully utilise software such as FLdigi, Echolink, PSK31, DM780, N1MM Logger, MixW and many more.

Complete plug-and-play solution. The interface is fully wired for your PC and transceiver. Just follow the instructions to download the FTDI drviers, configure up your Digimode software and you are up and running on PSK31 and many more AFSK modes.

The Tx/Rx audio signals are galvanically isolated by Bourns 600:600 Ohm transformers and the hardware PTT is opto-isolated. The USB section of the interface uses the highly reliable FTDI Chipset and provides a virtual comm port allowing hardare PTT keying over the RTS signal.

With this interface, you will be up and running on PSK31, Echolink, SSTV, Pactor, Packet or any mode that requires Tx/Rx Audio Interfacing between your PC Soundcard and Radio within minutes.

Cable length is 1.8m from the USB and audio connectors to the interface box. The cables from the interface box to the transceiver is 0.5m. The box is very small at 40x35x20mm making it ideal to hide away behind the PC or transceiver using no desk space.


Option 1
X108G

Note: Check your X108G has the 6 pin mini Din accessory socket. This interface is only compatible with the X108G with the 6 pin mini Din. Some X108G's may have an 8 pin socket fitted and this interface will not fit these radios.

 
Radio Type
 

 



 Digimode-3-Xiegu $66.00





External USB Sound Card isolated audio interface allowing you to operate many AFSK digital modes such as PSK31, FT8, JT9, JT65 and Echolink. Fully plug and play. Simply plug the USB cable into your PC and the Data plug into your transceiver.

Perfect with digital mode applications such as DM780, WSJT-X, FLDigi, Echolink etc.

The interface is fully galvanically isolated and uses the C-Media CM108 USB Audio Chipset. Most modern operating systems already have the CM108 driver pre-installed. The advantage of this interface is your PCs normal soundcard is not tied up for Digital mode operations. As you now have a separate and dedicated soundcard for your Digital Mode working, you can independently set the Tx/Rx audio levels leaving normal PC sound unaffected. This interface does include a VOX PTT but see the note regarding the X5105 and G90 below.

READ ME - PTT operation. For use with the X5105 and G90 transceivers the PTT needs to be actuated via the CAT commands.  For this, you will need a separate USB CAT interface. If you do not have one, have a look at our USB CAT Interface Xiegu-Cable-1-USB product (in the shop below) which will work alongside this interface. The Xiegu X108G, the PTT can be keyed via the interface built-in Vox circuit.

Cable length is 1.5m from the USB and audio connectors to the interface box. The cables from the interface box to the transceiver is 0.6m. The box is very compact at 80x40x20mm making it ideal to hide away behind the PC or transceiver using no desk space.

Please use the Option drop-down menu below to choose your Xiegu radio type 

Option 1

X108G
Note: Check your X108G has the 6 pin mini Din accessory socket. This interface is only compatible with the X108G with the 6 pin mini Din. Later X108G's may have an 8 pin socket fitted.

Option 2

X5105 and G90

 
Radio Type
 

 


 
XieguCable-1-USB $32.00

 



Xiegu USB CAT Interface Cable using the highly reliable FTDI Chipset. This interface allows you to use CAT control software and utilise the full feature set of Fldigi, WSJT-X, Ham Radio Deluxe and many others with your transceiver. It also allows you to correctly PTT Key the radio when operaing digital modes. The X5105 and G90 emulate the Icom IC-7000 CAT protocol.

The interface is fitted with the correct "recessed" 3.5mm CAT jack. (Standard 3.5mm plugs do not fit some Xiegu transcievers)


Full CAT control with CAT PTT on these tranceivers
.

X5105 and G90


* The standard cable length is 1.8m.